Conferences

M. Mancini; L. Rocchi; A. Cappello; L. Chiari, Comparison of wearable inertial devices and force plates for stance posture measurements, in: null, «GAIT & POSTURE», 2008, 28 suppl. 1, pp. S31 - S31 (atti di: VIII Congresso SIAMOC, Cuneo, 24-27 Ottobre 2007) [Abstract]

M. Mancini; L. Rocchi; A. Cappello; L. Chiari, Relationship between accelerometric signals from body-mounted sensors and center of pressure from a force plate during quiet stance, in: International Conference on Ambulatory Monitoring of Physical Activity and Movement - Conference Book, ROTTERDAM, Dept Rehabilitation Medicine Erasmus MC, 2008, pp. 156 - 156 (atti di: First International Conference on Ambulatory Monitoring of Physical Activity and Movement, Rotterdam, NL, 21-24 May 2008) [Abstract]

R. Grassi; A. Gnudi; E. Gnani; S. Reggiani; G. Cinacchi; G. Baccarani, Hierarchical modeling of carbon nanoribbon devices for CNR-FETs engineering, in: Conference Digest of the 66th IEEE Device Research Conference, SANTA BARBARA, CA, IEEE Press, 2008, pp. 105 - 106 (atti di: 66th IEEE Device Research Conference (DRC-2008), Santa Barbara, CA, 23-25 June 2008) [Contribution to conference proceedings]

E. Gnani; S. Reggiani; A. Gnudi; R. Colle; G. Baccarani, OH dangling-bond saturation and dielectric function effects in ultra-scaled SNW-FETs, in: Proceedings of the Device Research Conference, SANTA BARBARA, CA, IEEE Press, 2008, pp. 95 - 96 (atti di: Device Research Conference (DRC-2008), Santa Barbara, CA, 23-25 June, 2008) [Contribution to conference proceedings]

L. Silvestri; S. Reggiani; E. Gnani; A. Gnudi; G. Baccarani, Unified model for low-field mobility in bulk and SOI-MOSFETs with different substrate orientations and its application to quantum drift-diffusion simulation, in: Proceedings of the 9th International Conference on Ultimate Integration on Silicon pp. 129-132, 2008., UDINE, s.n, 2008, pp. 129 - 132 (atti di: 9th International Conference on Ultimate Integration on Silicon (ULIS 2008), Udine, 12-14 March 2008) [Contribution to conference proceedings]

R. Grassi; S. Poli; E Gnani; A. Gnudi; S. Reggiani; G. Baccarani, Tight-binding and effective mass modeling of armchair carbon nanoribbon FETs, in: Proceedings of the 9th International Conference on Ultimate Integration on Silicon, UDINE, s.n, 2008, pp. 121 - 124 (atti di: 9th International Con-ference on Ultimate Integration on Silicon (ULIS 2008), Udine, 12-14 March, 2008.) [Contribution to conference proceedings]

M. CAMORANI; F. MERNI; S.FANTOZZI, Kinematic comparison among players of different level in tennis serve, in: A. HOKELMANN, M. BRUMMUND, Proceedings World Congress of Performance Analysis of Sport VIII, MAGDEBURG, Otto von Guericke Universitat, 2008, unico, pp. 339 - 343 (atti di: World Congress of Performance Analysis of Sport VIII, Magdeburg (Germany), 3-6 September 2008) [Contribution to conference proceedings]

M. Ruggiero; A. Bartolini; L. Benini, DBS4video: dynamic luminance backlight scaling based on multi-histogram frame characterization for video streaming application, in: International Conference On Embedded Software Proceedings of the 7th ACM international conference on Embedded software, NEW YORK, ACM, 2008, pp. 109 - 118 (atti di: Proceedings of the 7th ACM international conference on Embedded software, Atlanta, GA, USA, 2008) [Contribution to conference proceedings]

M. Ruggiero; M. Lombardi; M. Milano; L. Benini, Cellflow: A Parallel Application Development Environment with Run-Time Support for the Cell BE Processor, in: Digital System Design Architectures, Methods and Tools, 2008. DSD '08. 11th EUROMICRO Conference on, s.l, IEEE, 2008, pp. 645 - 650 (atti di: DSD '08. 11th EUROMICRO Conference on Digital System Design Architectures, Parma, Italy, 3-5 SEPTEMBER 2008) [Contribution to conference proceedings]

A. Marongiu; A. Acquaviva; L. Benini; A. Bartolini, Analysis of Power Management Strategies for a Large-Scale SoC Platform in 65nm Technology, in: DSD '08. 11th EUROMICRO Conference on Digital System Design Architectures, Methods and Tools, s.l, IEEE, 2008, pp. 259 - 266 (atti di: IEEE Proceedings of International Conference on Digital Systems Design, Parma, Italy, 3-5 Sept. 2008) [Contribution to conference proceedings]

N. Zanolla; D. Siprak; M. Tiebout; P. Baumgartner; E. Sangiorgi; C. Fiegna., The impact of substrate bias on RTS and flicker noise in MOSFETs operating under switched gate bias, in: Proceedings of Intl. Conference on Solid State and Integrated Circuits Technology, PISCATAWAY N.J., IEEE, 2008, pp. 80 - 83 (atti di: International Conference on Solid State and Integrated Circuits Technology, Beijing, China, 21-23 October 2008) [Contribution to conference proceedings]

G. Conte; A. M. Perdon; E. Zattoni, The Autonomous Regulator Problem for Linear, Time-Delay Systems: A Geometric Approach, in: Proceedings of the 47th IEEE Conference on Decision and Control, MADISON, WI, Omnipress for IEEE Control Systems Society, 2008, ThB07.5, pp. 4663 - 4668 (atti di: 47th IEEE Conference on Decision and Control, Cancun, Mexico, December 9-11, 2008) [Contribution to conference proceedings]

A. Bazzi; B. M. Masini; A. Conti; O. Andrisano, Infomobility Provision through MBMS/UMTS in Realistic Scenarios, in: Proceedings of the 11th International IEEE Conference on Intelligent Transportation Systems., PISCATAWAY (NJ), IEEE, 2008, pp. 1 - 6 (atti di: The 11th International IEEE Conference on Intelligent Transportation Systems, Beijing, China., Oct. 12-15, 2008.) [Contribution to conference proceedings]

Mariani Giacomo; Massimo Fabbri; Francesco Negrini; Pier Luigi Ribani, HIGH GRADIENT MAGNETIC SEPARATION OF MICRO-POLLUTANT FROM WASTEWATERS, in: Proceedings 1st European Conference on Microfluidics (MicroFlu’08), PARIS, Societe Hydrotechnique de France, 2008, 1, pp. 1 - 13 (atti di: 1st European Conference on Microfluidics (MicroFlu’08), Bologna (I), Dicember 10-12, 2008) [Contribution to conference proceedings]

A. Morandi; L. Trevisani; F. Negrini; M. Fabbri; P. L. Ribani, Sistema di accumulo dell’energia per veicolo ibrido a combustibile criogenico mediante magnete superconduttore, in: Atti della 24° Riunione annuale dei Ricercatori di Elettrotecnica –ET2008, PAVIA, s.n, 2008, pp. 1 - 2 (atti di: 24° Riunione annuale dei Ricercatori di Elettrotecnica –ET2008, PAVIA, 19-21 Giugno 2008) [Abstract]

M. Fabbri; M. Forzan; S. Lupi; A. Morandi; P. L. Ribani, Analisi sperimentale e numerica del riscaldamento ad induzione DC di billette di alluminio, in: Atti della 24° Riunione annuale dei Ricercatori di Elettrotecnica –ET2008, PAVIA, s.n, 2008, pp. 1 - 2 (atti di: 24° Riunione annuale dei Ricercatori di Elettrotecnica –ET2008, PAVIA, 19-21 Giugno 2008) [Abstract]

G. Mariani; M. Fabbri; F. Negrini, Studio della separazione magnetica dei microinquinanti prioritari dalle acque reflue, in: Atti della 24° Riunione annuale dei Ricercatori di Elettrotecnica –ET2008, PAVIA, s.n, 2008, pp. 1 - 2 (atti di: 24° Riunione annuale dei Ricercatori di Elettrotecnica –ET2008, PAVIA, 19-21 Giugno 2008) [Abstract]

L. Trevisani; A. Morandi; F. Negrini; P. L. Ribani; M. Fabbri, Cryogenic Fuel Cooled SMES for Hybrid Vehicle Application, in: Abstracts of the Applied Superconductivity Conf. (ASC 2008), CHICAGO, s.n, 2008, pp. 3LB06 - 3LB06 (atti di: 2008 Applied Superconductivity Conference, Chicago, August 17 - 22, 2008) [Abstract]

Sathanur A., Calimera A., Pullini A., Benini L., Macii A., Macii E., Poncino M. ;, On quantifying the figures of merit of power-gating for leakage power minimization in nanometer CMOS circuits, in: ISCAS 2008. IEEE International Symposium on Circuits and Systems,, PISCATAWAY, NJ, IEEE, 2008, pp. 2761 - 2764 (atti di: International Symposium on Circuits and Systems,, Seattle, WA, USA, 18-21 May 2008) [Contribution to conference proceedings]

J. Iannacci; B. Margesin; F. Giacomozzi; E. Brusa; M. Gh. Munteanu; A. Gnudi, Improvements in Accuracy of RF-MEMS Electromechanical Simulation within Cadence, in: Proc. of the 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008), s.l, s.n, 2008, pp. MS 151 - MS 151 (atti di: 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008), Venice, Italy, June 30 - July 5, 2008) [Contribution to conference proceedings]